Best Angle Suitable for Solar panels
What is the Best Angle Suitable for Solar panels is a common question we are asked when people are buying a solar ready carport. The Solar ready skillion carports are usually manufactured with only a 5 degree pitch so the question often is – “Is this enough?”
The answer is usually “No, it is not enough” but any good solar installer will use aluminium frames or ’tilt frames’ for your panels on the roof to ensure the most effective angle for the place you live.
The following is an excellent summary from “Solarquotes” The full article can be ready by clicking here.
The angle your solar panels are mounted at will affect how much power they generate for you.
Generally speaking, (unless your roof is flat) the pitch of your home’s roof is going to be the angle your solar panels are mounted at. In Australia, common roof pitches are 15° or 22.5° – so your modules will most likely be mounted at one of those angles:
Best Angle Suitable for Solar Panels – What if you have a flat roof?
If your roof is totally flat, then I strongly recommend mounting the solar panels at an angle of at least 10°. This is really important because it will allow any rain to run off the modules.
If the rainwater pools on the surface of the solar panel, it is more likely to eventually get through the panels’ seals and into the solar cells themselves. If this happens it is game over for the panel as you will get an earth fault and need to replace the module. Many panels have a warranty condition stipulating they must be mounted at at least 10° from horizontal, so failure to do could void your warranty.
Ask an Expert
Don’t listen to anyone that tells you to have the solar panels horizontal and just add a panel or two to make up for lost efficiency. Horizontal panels are asking for trouble down the line. They will also get a lot dirtier because they will have very little ability to self-clean through rain, so you’ll need to manually clean them more often; which is time consuming – and time is money. Added to that, getting up and working on a roof is a safety risk.
For these reasons, if you have a flat roof, most good installers will add the option of a tilt frame to their quote.
As I’ve said, tilt frames on a flat roof are a good idea. But sometimes an installer will propose tilt frames for a roof that already has a small pitch to increase the angle of the solar panels and get a little more power (for the reasons described in the next section). If your installer is proposing tilt-frames for a non-flat roof, I highly recommend that you read the blog post I wrote on the cost benefits of tilt frames before proceeding.
If you really want to lay those panels flat then there is an option: frameless solar panels.
These are panels without an aluminium frame, meaning there is no ridge around the panel to collect grime and water. However, frameless panels have proven to be difficult to install given the required clamping zones, so I don’t recommend them.
Does the amount of tilt angle really matter – Best Angle Suitable for Solar panels?
Yes – the tilt of your solar panels will affect how much power they produce because the tilt will affect how much sunlight you capture.
Consider a solar panel flat on the ground that is 1m wide.
When the sun is high in the sky (e.g. at midday in summer), then a 1m wide shaft of sunlight will be completely captured by that solar panel:
Now, if the sun is at an angle of 30° from horizontal, that same 1m wide shaft of light actually is spread out over 2m when it hits the ground:
The flat solar panel, in this example, will only get half the sunlight, and therefore produce half the energy compared to the sun being directly overhead.
The solution in this example is, of course, to tilt the panel by 60° so that it captures all the sunlight:
So what is the best angle for a solar panel?
The angle of the sun in the sky depends on both the season and your location on the earth. In winter the sun is lower in the sky, while in summer it is higher. The closer you live to the equator (i.e. the lower your latitude), the higher the sun is in the sky all year round.
So you may think that calculating the optimum tilt for the panels on your roof is going to be really complicated…
Luckily it is actually dead simple.
An ideal angle for your solar panels (to maximize the power produced over the whole year) is simply the latitude of your location (well, fairly close to it anyway):
| City | Latitude |
| Canberra | 35° |
| Hobart | 42° |
| Darwin | 12° |
| Adelaide | 35° |
| Perth | 31° |
| Brisbane | 27° |
| Melbourne | 37° |
| Sydney | 34° |
So for my house in Adelaide, a good solar panel angle is 35° from horizontal.
Why is a great solar panel angle simply your latitude?
Because your latitude is the same as the angle of the sun in the sky halfway between midwinter and midsummer. The sun will be about 15 degrees higher in the sky in summer and 15 degrees lower in the sky in winter. So tilting your panels to the midway point will maximize the sun captured throughout the year.
How much power do you lose if your roof is at a different angle to your latitude?
In a perfect world all builders would be forced to build roofs with pitches the same as the latitude of the house. However as mentioned before, most roofs in Australia are at 15° or 22.5°.
So how much solar power are you losing if your panels are not at the perfect tilt angle?
This depends on the direction (orientation) of your roof, the location of your roof and the pitch of your roof. If you want to calculate it yourself, then the easiest way is use our power loss table. Just pick the capital city nearest to you and find the power loss.
Adelaide as an example
Let’s use my home in Adelaide as an example. The roof pitch is 15°, which is 20° lower than the ideal angle of 35°.
When you crunch the numbers, the efficiency hit is only 2% – almost nothing.
With a flat roof the power hit would be 9% lower. That is comparing it to having the solar panels at 35°.
In summary
A roof pitch at more than 10°, then your solar panels are not at their perfect tilt angle. In some cases this will be close enough.
If your roof is totally flat you should mount your solar panels on tilt-frames to avoid water pooling problems. This also allows for self cleaning in the rain. With tilt-frames, mount the solar panels at the perfect tilt angle for your latitude to maximise the power you generate. This will make a difference over the course of a year.
1 Comment